Solar Panel

Solar Inverter

Solar lamps

Solar lamps

Solar lamps

Solar lamps

Solar Water Heater

Model:DFSX

Flat Type Pressurized System
Working pressure: 6 bar
Heat preservation: 48-72 hours
Features
Flat panel Solar Water Heating System uses the thermosiphon principle to transfer heat from collector to water inside the tank. The collectors are coated with a heat absorbent surface which absorbs the sun rays and beats fluid in the collector. As the fluid is heated it rises to the top of the collector panel and into the tank were it displaces cooler fluid which flows into bottom of the collector panel where the process is repeated. The more temperature difference between the fluid in the collector panel and in the tank the faster flow and the heat exchange.
Using thermosiphon system-Depending on the different density between hot water and cold water, a water flowing cycle is created in the tubes. Hot water flows automatically upwards while the cold water flows down. The water in the storage tank will be heated from the natural circulation.

Solar Water Heater

Model:DTSX

Tube Type Pressurized System
Working pressure: 6 bar
Heat preservation: 48-72 hours
Features
This type uses the all-glass evacuated solar collector tubes as the heat-absorbing element. The high vacuum degree of the clearance between the outer and inner tube reduces the heat emission which is caused by convection and conduction. The layer films (coating) of the all-glass evacuated tubes transfer the sun energy into heat energy. The high absorption and low emittance rate of HEL layer film is unique.
In this model heating start up quickly, heat pipe transfer the heat energy into the storage tank in one direction. No water enters the evacuated tubes therefore the solar water heater can still be in service even with several tubes breakage. Simple structure amd is easy to assembly and install can also be used together with auxillary electric boost. Heat transfer occurs even after sunset as the Cu rod and foil inside the evacuated tubes also traps certain amount of heat.

Solar Water Heater

Model:DGX

Inner tank: Stainless steel SS304-2B, Thickness >0.41mm
Outer tank: Stainless steel SUS430, Thickness >0.4mm
Tank diameter: 460 mm
Features
This type uses the all-glass evacuated solar collector tubes as the heat-absorbing element. The high vacuum degree of the clearance between the outer and inner tube reduces the heat emission which is caused by convection and conduction.The layer films (coating) of the all-glass evacuated tubes transfer the sun energy into heat energy. The high absorption and low emittance rate of HEL layer film is unique.
Using thermosiphon system-Depending on the different density between hot water and cold water, a water flowing cycle is created in the tubes. Hot water flows automatically upwards while the cold water flows down. The water in the storage tank will be heated from the natural circulation.

Solar Water Heater

Model:DGL

Assistant tank for automatic water loading
Inner tank: Stainless steel SUS304-2B, Thickness >0.41 mm
Outer tank: Stainless steel SUS430, Thickness >0.4 mm
Tank diameter: 460 mm
Features
This type uses the all-glass evacuated solar collector tubes as the heat-absorbing element. The high vacuum degree of the clearance between the outer and inner tube reduces the heat emission which is caused by convection and conduction. The layer films (coating) of the all-glass evacuated tubes transfer the sun energy into heat energy. The high absorption and low emittance rate of HEL layer film is unique.
Using thermosiphon system-Depending on the different density between hot water and cold water, a water flowing cycle is created in the tubes. Hot water flows automatically upwards while the cold water flows down. The water in the storage tank will be heated from the natural circulation.

Solar Water Heater

Model:DGB

Inner tank: Stainless steel SS304-2B, Thickness >0.41mm
Outer tank: Stainless steel SUS430, Thickness >0.4mm
Frame: Aluminum/Stainless steel/GI
Features
This type uses the all-glass evacuated solar collector tubes as the heat-absorbing element. The high vacuum degree of the clearance between the outer and inner tube reduces the heat emission which is caused by convection and conduction. The layer films (coating) of the all-glass evacuated tubes transfer the sun energy into heat energy. The high absorption and low emittance rate of HEL layer film is unique.
This model can be installed in slope roofs where flat surface is unavailable. Low height of the system reduces the need of increasing the high of cold water storage tank.Using thermosiphon system-Depending on the different density between hot water and cold water, a water flowing cycle is created in the tubes. Hot water flows automatically upwards while the cold water flows down. The water in the storage tank will be heated from the natural circulation.

Solar Water Heater

Model:DNX

nner tank: Stainless steel SUS304-2B, Thickness >0.41 mm
Outer tank: Powder Coated GI Sheet
Tank diameter: 460 mm
Features
This type uses the all-glass evacuated solar collector tubes as the heat-absorbing element. The high vacuum degree of the clearance between the outer and inner tube reduces the heat emission which is caused by convection and conduction. The layer films (coating) of the all-glass evacuated tubes transfer the sun energy into heat energy. The high absorption and low emittance rate of HEL layer film is unique.
Using thermosiphon system-Depending on the different density between hot water and cold water, a water flowing cycle is created in the tubes. Hot water flows automatically upwards while the cold water flows down. The water in the storage tank will be heated from the natural circulation.

Solar Water Heater

Model:DNL

Assistant tank for automatic water loading
Inner tank: Stainless steel SUS304-2B, Thickness >0.41 mm
Outer tank: Powder Coated GI Sheet
Features
This type uses the all-glass evacuated solar collector tubes as the heat-absorbing element. The high vacuum degree of the clearance between the outer and inner tube reduces the heat emission which is caused by convection and conduction. The layer films (coating) of the all-glass evacuated tubes transfer the sun energy into heat energy. The high absorption and low emittance rate of HEL layer film is unique.
Auxillary tank removes the need for an air pipe in the system which makes it easier for installation and improves the aesthetics of the system. Using thermosiphon system-Depending on the different density between hot water and cold water, a water flowing cycle is created in the tubes. Hot water flows automatically upwards while the cold water flows down. The water in the storage tank will be heated from the natural circulation.

Solar Water Heater

Model:DNPX

Inner tank: Stainless steel SUS304, Thickness >0.41mm
Compatible Upto 2000 PPM hardness
Outer tank: Powder Coated GI Sheet
Features
This type uses the all-glass evacuated solar collector tubes as the heat-absorbing element. The high vacuum degree of the clearance between the outer and inner tube reduces the heat emission which is caused by convection and conduction. The layer films (coating) of the all-glass evacuated tubes transfer the sun energy into heat energy. The high absorption and low emittance rate of HEL layer film is unique.
Using thermosiphon system-Depending on the different density between hot water and cold water, a water flowing cycle is created in the tubes. Hot water flows automatically upwards while the cold water flows down. The water in the storage tank will be heated from the natural circulation.